INDUSTRY
Type 06216, Type 06217
Safety Valves, brass,
type tested TÜV-SV.1090 S/G



Standard safety valve with FPM valve seal, open bonnet, with discharge holes Inlet: male thread type G (BSPP) acc. to ISO 228/1


Part No. 06216.X.0000
Part No. 06217.X.0000

with lifting device

Available options - on request only:

- discharge holes with protection cap
- stainless steel spring - material 1.4571
- external parts nickel plated


Applications:
Provided as safety device for protection against excessive pressure in stationary and moveable gas cylinders and pressure vessels. Approved for air and similar gases.
Working temperature: -40°C / -40°F (233K) up to +200°C / +392°F (473K), suitable for horizontal installation

 
Type 06216, Type 06217
 

Materials

DIN EN

ASME/ASTM

1 Body CW617N B 283 UNS C37700
2 Valve seal FPM (Viton-GLT)
3 Disc CW614N B 455 UNS C38500
4 Stem CW614N B 455 UNS C38500
5 Bonnet CW614N B 455 UNS C38500
6 Spring 1.1200 A 227
7 Stem guide PTFE
8 Cap CW614N B 455 UNS C38500
9 Lifting device CW614N B 455 UNS C38500
10 Closing cap CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 2014/68/EU (PED).
Marking acc. to ASME Code Section VIII will only
be carried out by written notice on purchase order.
 
Type 06216, Type 06217
 

Type 06216, Type 06217 Technical data
Nominal size GW 1/2 3/4 11-1/4 1-1/22
Orificed0121520253240
Dimension code.X.040006001000120014002000
Set pressure rangebar0.2-250.2-300.2-300.2-220.2-160.2-12
HeightH1103122149169198224
HeightH2107126150172200228
LengthL2 141618202225
Wrench size across flatsS1 273241505570
Weightca. kg0.250.410.721.231.733.09
Coeff. of discharge from 3.0 barαw0.830.830.730.710.690.66
Coeff. of discharge from 3.0 barrated slope2.594.106.7910.1516.5024.80
Dimensions in mm.



Discharge capacities

Medium:
Air in m³/h at 0°C and 1013.25 mbar
Air in SCFM at 60°F (15.6°C) and 14.7 psia (1013.25 mbar)

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area

Calculation of discharge capacity acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1 resp. ASME Code Sec. VIII. The safety valve is marked with the lower capacity of both calculations.


Set
pressure
in bar (ü)
GW1/23/411-1/41-1/22
d0 (mm)12.015.020.025.032.040.0
A0 (mm²)113.1176.7314.2490.9804.21256.6
MediumAir in m³/h
0.24978128194317436
0.583133211309518712
1.01241963084597761085
2.020131749575212151760
3.0276432675102616342442
4.0347542847128820513065
5.04186541022155324733696
6.04897641194181528904320
7.05608741367207733084944
8.06329881544234737375585
9.070310981717261041566211
10.077512121894287945846851
11.084613222068314250037478
12.091714332241340654238105
14.010591655258839336263-
16.012011877293544607102-
18.01343209932824988--
20.01500234336645567--
22.01643256740146100--
25.0185829034539---
26.0-30154714---
28.0-32395064---
30.0-34965466---

Set
pressure
in psig
GW1/23/411-1/41-1/22
d0 (inch)0.4720.5910.7870.9841.2601.575
A0 (in²)0.1750.2740.4870.7611.2471.948
MediumAir in SCFM
1578124194290490687
301271953154797731123
5019128546671011301688
6022133054082213081955
7025137561493314862222
80281421688104516652488
90312466762115718432755
100341511835126920223022
120402601981149223763551
1304326461055160425543818
1404626911129171627334084
1504927361203182829114351
1605227811277194030904618
1745658451380209833404992
180583872142421643446-
190613917149822763624-
200643962157223883803-
2207031052171926134160-
2327391106180727474374-
240764114218662836--
260824123220143060--
280884132321613284--
300945141323083509--
3191002149824483721--
340106515932603---
363113416972772---
380-17742897---
400-18643045---
420-19543192---
435-20223302---