CRYOGENIC
Type 41091 - Electropneumatic Positioner EEx
|
Electropneumatic positioner for pneumatic Actuator ATTENTION - operate only with dry, oil-free air acc. to IEC654-2 ! Protecting class IP66 acc. to EN 60529, with EEx-protection: II 2 G EEx ia IIC T6 Operation: simple, Inlet air pressure: max. 6.0 bar - connection with female thread G1/4 Electrical connection: screw type terminals 2.5 mm², cable gland: M 20 x 1.5 Set point x: 4 - 20 mA with 2 conductor connections Internal resistance: Ri = 500 Ohm (2-wire) Ambient temperature: -30°C / -22°F up to +50°C / 122°F inclusive fixing device for actuators with lift up to 35.0 mm for actuators type 27511, 27514 and 27521 (spring to close) Part No. 41091.6136.00AA000 standard version - 2 wire connection Part No. 41091.6136.00AA020 with IY-module: 4...20 mA check-back signal (2-wire) Part No. 41091.6136.00EA000 with Profibus PA connection for actuators type 27512, 27515 and 27522 (Feder öffnet) Part No. 41091.6136.01AA000 standard version - 2 wire connection Part No. 41091.6136.01AA020 with IY-module: 4...20 mA check-back signal (2-wire) Part No. 41091.6136.01EA000 with Profibus PA connection inclusive fixing device for actuators with lift from 35.0 mm up to 130.0 mm for actuators type 27511, 27512, 27514, 27515, 27521 and 27522 Part No. 41091.6136.12AA000 standard version - 2 wire connection Part No. 41091.6136.12AA020 with IY-module: 4...20 mA check-back signal (2-wire) Part No. 41091.6136.12EA000 with Profibus PA connection |
|
|||
|
|
|
