CRYOGENIC
Type 40090 - Electropneumatic Positioner
Electropneumatic positioner for pneumatic Actuator

ATTENTION - operate only with dry, oil-free air acc. to IEC654-2 ! Protecting class IP66 acc. to EN 60529, Operation: simple, Inlet air pressure: max. 6.0 bar - connection with female thread G1/4 Electrical connection: screw type terminals 2.5 mm², cable gland: M 20 x 1.5 Set point x: 4 - 20 mA with 2 conductor connections 0/4 - 20 mA with 3/4 conductor connections Auxiliary power with 3/4 conductor connections: UH: 18-30V DC Internal resistance: Ri = 500 Ohm (2-wire) Ri = 50 Ohm (3/4-wire) Ambient temperature: -30°C / -22°F up to +80°C / 176°F



Part No. 40090.6136.00DA000

standard version (3/4-wire)
Part No. 40090.6136.00DA010
with installed limit indicator, incl. 2nd cable fitting, alarm module; electronic (6DR4004-8A), (3/4-wire)
Part No. 40090.6136.00DA020
with IY-module: 4...20 mA check-back signal (3/4-wire)
Part No. 40090.6136.00EA000
with Profibus PA connection
Part No. 40090.6136.00FA000
with foundation fieldbus and fixable friction clutch
Part No. 40090.6136.00BA100
with HART connection (2-wire)








 
Type 40090 - Electropneumatic Positioner
 
 
 

Produktdetails Produktanfrage


* : required field | Privacy Policy