INDUSTRY
Type 06810, Type 06815 - Sealing plate
Safety Valves, angle type, stainless steel, type tested, TÜV-SV.1130. S/G/L

Standard safety valve with soft valve seal, "cleaned and degreased" closed bonnet, gastight cap or lifting device Inlet: male thread type G (BSPP) acc. to ISO 228/1 Outlet: female thread type G (BSPP) acc. to ISO 228/1

Part No. 06810.X.000001L (Pmax 150.0 bar)

with gastight cap
Part No. 06815.X.000001L (Pmax 150.0 bar)
with lifting device

Available options - on request only:

- Flange-, NPT- or Tri-Clamp connection for in- and outlet





Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels. Approved for gases, vapours and liquids.
Working temperature: -270°C / -454°F (3K) up to +300°C / +572°F (573K) Pressure-temperature must be observed, suitable for horizontal installation from 20 bar

 
Type 06810, Type 06815 - Sealing plate
 

Materials

DIN EN

ASME/ASTM

1 Outlet body 1.4408 A 351 CF8M
2 Inlet body 1.4571 A 276 Grade 316Ti
3 Disc 1.4571 A 276 Grade 316Ti
4 Sealing plate VESPEL
5 Stem 1.4404 A 276 Grade 316L
6 Bonnet 1.4408 A 351 CF8M
7 Spring 1.4571 A 313 Grade 316Ti
8 Cap 1.4408 A 351 CF8M
9 Lifting cap 1.4408 A 351 CF8M
10 Lever 1.4301 A 276 Grade 304
Spare Parts
2 Inlet body 1.4571 316Ti
3.1 Split pin 1.4571 316Ti
4 Sealing plate VESPEL
11 Gasket 1.4404 Graphite 316L Graphite
12 Gasket PTFE
13 Gasket PTFE
14 O-ring FPM (VITON)

 
Type 06810, Type 06815 - Sealing plate
 

Type 06810, 06815Technical Data
D0 [mm] 10
InletGW1/21/23/4
OutletGW1/23/43/4
Dimension code.X.102210231033
HeightH245.0245.0245.0
LengthL144.044.044.0
LengthL232.032.032.0
LengthA114.014.016.0
Weight 06810ca. kg1.81.81.8
Weight 06815ca. kg2.02.02.0
Coeff. of dischargeαw S/G/L0.500.500.50
Min. set pressurebar-g1.51.51.5
Max. set pressurebar-g150.0150.0150.0
Min. temperature°C-270-270-270
Max. temperature°C+300+300+300
Dimensions in mm.



Pressure-Temperature Rating



Discharge capacities
Calculation of flow rate acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1

Medium:
A = Saturated steam in kg/h
B = Air in m³/h at 0°C and 1013,25 mbar
C = Water in kg/h at 20°C

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area


Set
pressure
in bar (ü)
GW1/2, 3/4 & 1
d0 (mm)10.0
A0 (mm²)78.5
MediumABC
0.2---
0.5-401549
1.0-552097
2.0-862966
3.0-1163632
4.0-1454194
5.0-1754689
6.0-2055137
7.0-2345548
8.0-2645931
9.0-2946291
10.0-3246631
15.0-4726947
20.0-6279378
30.0-93611485
40.0-124913262
50.0-156814828
60.0-189016243
65.0-204516906
70.0-2216-
80.0-2546-
90.0-2878-
100.0-3212-
110.0-3544-
120.0-3877-
140.0-4549-
150.0-4872-
Produktdetails Produktanfrage


* : required field | Privacy Policy